Equipment Introduction

Used for pressing the nuts of automobile body structural parts, and the torque value of the nuts after the parts are pressed reaches 57N.M

Product Application

Body structural parts

Process Flow

1.Manually place the workpiece on the positioning fixture (workpiece detection)

2.Manually place the nut on the upper pressing head (nut detection)

3.The operator exits from the equipment safety light curtain and presses the start button

4.The pneumatic fixture clamps the workpiece

5.The press moves to press the nut in place (monitor pressure and displacement during pressing)

6.The pneumatic fixture opens

7.The operator unloads the product and puts it into the finished material box

8.Cycle time: 8s (excluding manual loading and unloading)

Main Parts

TOX pressure cylinder, pressure/displacement monitoring, SIEMENS PLC and control, etc